Fully insured(530) 820-2112
SolarGuard USA

Do Solar Panels Need Ember Guards in Wildfire Areas?

How debris under rooftop solar panels creates wildfire risk, what experts recommend, and how ember-rated barriers like SolEmber protect homes in fire-prone areas.

Short answer

Properly installed solar panels don't raise your fire risk on their own. The risk comes from leaves, needles and nesting material that collect underneath, which embers can ignite. Keeping that space clear and sealing it with an ember-rated barrier is the strongest protection in fire-prone areas.

What wildfire experts say

The University of California's fire network states that properly installed panels do not increase fire risk, but that panels can become vulnerable to wildfires if debris accumulates underneath them, and that regular debris removal minimizes the risk of ignition near solar panels.

FEMA's homeowner guide describes roof debris as combustible fuel easily ignited by embers, and notes that metal mesh with openings of 1/8 inch or smaller helps keep embers out of vents. The same idea applies to the gap under a solar array.

Why the gap under panels matters

  • It collects dry leaves, pine needles and old nests, which are exactly the fuel embers need.
  • It's hard to see or reach from the ground, so buildup goes unnoticed for years.
  • Wiring and connectors run through the same space.

Standard guards vs. ember-rated guards

Standard critter guard mesh keeps animals out, and with it, most of the nesting material. Ember-rated barriers go further. SolEmber, made by SolaTrim, uses 304 stainless steel mesh with a black powder coat. According to the manufacturer, it is tested to ASTM E2886 for ember and flame penetration and ASTM E2768 for ignition resistance, carries a Class A fire rating, and meets WUI and California Chapter 7A wildfire construction requirements.

Who should consider ember guards

  • Homes in El Dorado Hills, Granite Bay and other foothill or wildland-edge neighborhoods.
  • Homes with oaks or pines overhanging the roof.
  • Anyone who wants the highest level of protection under their panels.

What we do

  1. Clean the panels and clear all debris from under the array.
  2. Fit SolEmber around the full perimeter with adhesive, no drilling.
  3. Photograph everything so you have a record for your own files.

See wildfire ember guards, or read about service in El Dorado Hills and Granite Bay.

Common questions

Do ember guards block airflow under the panels?

Fine mesh still lets air move under the array while keeping embers and debris out.

Is SolEmber required by code?

It's not required for existing homes, but it meets California's wildfire construction standards for homes that want that level of protection.

Sources

Ready for Clean, Protected Panels?

Call or text, or schedule online and we'll confirm a time.